ماژول ارتباط سریال برند MSA مدل CC02A


ویژگی‌های محصول
  • Device Name/ Farsi:  ماژول ارتباط سریال برند MSA مدل CC02A
  • Device Name / English:  MSA Brand Serial Communications Module Model CC02A
  • Model / Part Number:  CC02A
  • Brand:  
  • Origin:  
  • Device Type:  Serial Communications Module
+ بیشتر

مقایسه

مشاوره و پشتیبانی به کارشناسان شما

ارائه پیش فاکتور و فاکتور رسمی

امکان مقایسه محصول

ارائه گواهی ضمانت اصل بودن محصولات

پشتیبانی تلفنی قبل و بعد از خرید

توضیحات

ماژول ارتباط سریال برند MSA مدل CC02A

(MSA Brand Serial Communications Module Model CC02A)

MSA Brand Serial Communications Module Model CC02A

MSA Brand Serial Communications Module Model CC02A

Description

The General Monitors CC02A Communications Card facilitates serial communications between each

module in a General Monitors Zero Two Series System and an external host computer, allowing fast

access to operational and setup data registers.

It supports a Burst Read feature, which returns all registers of a module in a single transmission.

The module acts as an intelligent bridge between the Zero Two Series System communications bus and the host,

implementing all necessary protocol conversions and error check routines.

It maps user selected Zero Two Series System Serial module node addresses into the MODBUS node address space.

The CC02A presents an RS-485 based MODBUS RTU Slave interface to the host, while an additional

and independent RS-232 based MODBUS RTU Slave interface supports simultaneous communication with a second or local host.

The card can be programmed to act as Master or Slave on the Zero Two Series System communications bus.

A single CC02A is used as Master of a Zero Two Series System. An additional card configured as Slave until required will increase fault tolerance.

In the Zero Two Series chassis, the CC02A interfaces with the Fault, Accept and Master Reset bus.

Accept, Reset, LED Test and Card Test commands can be transmitted to an individual Zero Two Series module.

In Broadcast mode these commands are executed by all Zero Two Series modules simultaneously.

The CC02A supports LED Test, operates from a 10VDC to 35VDC power supply and detects low supply conditions.

It has a Normally Energized Fault relay and a Fault Unaccept open-collector output.

Communications errors are flagged by their corresponding exception codes in the MODBUS response.

Features

Zero Two Series System Serial Communications

User configurable

RS-485 and RS-232 MODBUS RTU ports

Master/Slave configuration

Battery backup connection, watchdog, fault relay, communications error detection

Communicates with multiple nodes

Benefits

On-line access to all operational and setup data

Flexibility and ease of operation

Dual MODBUS master configuration or local host monitoring possible

Increased fault tolerance from additional CC02A

Protection against malfunction

Cost effective solution for large systems

مشخصات فنی

Device Name/ Farsi

ماژول ارتباط سریال برند MSA مدل CC02A

Device Name / English

MSA Brand Serial Communications Module Model CC02A

Model / Part Number

CC02A

Brand

Origin

Device Type

Serial Communications Module

Operating Voltage

Operating Temperature

Humidity

(Power Consumption(Alarm

(Power Consumption(Standby

EMC Compliance

EMC Susceptibility: Conforms to EN50081-1, EN50082-1 10V/m max.

Weight/Dimension

Size: 173x25x251 mm HxWxD | weight: 11.2 ounces (318 grams)

Relay outputs

Relay Rating: SPDT 5A @125/250VAC, 3A @ 30VDC

Protocol

Protocol: MODBUS RTU Slave

نقد و بررسی‌ها

هنوز بررسی‌ای ثبت نشده است.

اولین کسی باشید که دیدگاهی می نویسد “ماژول ارتباط سریال برند MSA مدل CC02A”

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *