توضیحات
کنترل پنل اعلام حریق برند Siemens مدل FC2030-AA
(Siemens Brand Control Panel Model FC2030-AA)
Description
The FC2030-AA is designed for modernizing existing installations with max.
۲۰۰ MS9i series detectors or 16 collective lines.
It is suited to a gradual seamless transition from older systems to Sinteso.
The FC2030-AA is a modular, prefabricated, microprocessor-controlled fire control panel
with integrated operating unit for migration on Sinteso of up to max. 252
Modular, pre-assembled fire control panel with integrated, user-friendly operating unit
for gradual migration to Sinteso.
Fire control panel for a maximum of 756 addresses
Can be used as a standalone version or networked with up to 64 stations, such as
control panels and terminals
Redundant network node with degraded mode operation according to EN 54
Emergency power supply for emergency operating time of up to 72 hours
Detection and automatic importing (auto-configuration) of all FDnet devices, ready
for operation immediately
Flexible configuration of complex applications and controls
Configuration data can be uploaded/downloaded via remote access
Extensions: Printer, key switches, LED indicators
Card cage for additional module bus cards (line and I/O cards)
Hot plug system: Module bus cards can be changed during operation
General features and functions
Fast Ethernet interface for a heterogeneous network
Processes signals from Sinteso as well as from earlier detector series
Siemens danger management system can be connected
Slots for RS232 and RS485 serial interfaces
Floor repeater devices, alarm devices, and mimic displays on the FDnet detector line
All detector lines are monitored for ground faults.
Mixed use of all module bus cards (line and I/O cards) possible.
Integrated degraded mode function
Freely configurable, time-dependent controls with optional weekly switching programs
Time and situation-dependent changeover of detector parameter sets
Controls for synchronous activation of sounders / sounder bases with signal sound,
flash, and voice output
The control panel and the fire detection system are custom-configured using the
‘SintesoWorks’ software
Firmware for all processor-controlled control panel components can be updated
Customer texts can be adapted directly on the operating unit of the control panel or with
the ‘SintesoWorks’ software
Up to 13000 events can be called up from the event memory and filtered based on
various criteria
Automatic summer/normal time changeover
Operating unit
The following elements are available on the operating unit:
CPU module and electronics
Ethernet connection
Slots for RS232 and RS485 modules and network modules (SAFEDLINK)
Space for ‘Kaba’ or ‘nordic’ key switch
Space for event printer (depending on version)
Peripheral data bus connection for optional LED modules
Periphery board
The following elements are available on the periphery board:
Connection terminals for:
– FDnet lines
– Remote transmission (alarm, fault)
– Horn output
– Configurable control inputs and outputs
– Monitored alarm and fault output
– Power supply and emergency supply
۱x slot for loop extension (FDnet)
Card cage
There is a card cage mounted on the rear housing panel for inserting a maximum of two
module bus cards.
Power supply unit 150 W, emergency power supply
The power supply feeds the hardware and charges the batteries.
In the event of a power cut, the batteries provide emergency current.
Housing
A pivoting mounting plate can be fitted for the following elements above the periphery board
on the rear housing panel:
۱x fire brigade periphery module (for Germany)
۱x sounder module (as an alternative to mounting on U-rail TS35)
Configuration
The following software allows the system to be customized:
SintesoWorks
نقد و بررسیها
هنوز بررسیای ثبت نشده است.