توضیحات
کنترل پنل اعلام حریق برند Siemens مدل FC2040-AA
(Siemens Brand Control Panel Model FC2040-AA)
Description
The FC2040-AA (4-loop, expandable to 8) is a compact fire control panel with an integrated operating unit that can process signals from Sinteso devices of up to 504 addresses.
The fire control panel can be used as a stand-alone version or networked.
The control panel can be programmed with a user-friendly engineering tool (SintesoWorks) to create a system with great versatility.
Up to 32 fire control panels and fire terminals can be connected in a single cluster (FCnet/SAFEDLINK
Compact, pre-assembled fire control panel with integrated, user-friendly
operating unit.
Fire control panel for a maximum of 504 addresses
Optional, integrated single-sector extinguishing
Can be used as a standalone version or networked with up to 64 stations, such as control panels and terminals
Redundant network node with degraded mode operation according to EN 54
Emergency power supply for emergency operating time of up to 72 hours
Detection and automatic importing (auto-configuration) of all FDnet devices, ready
for operation immediately
Flexible configuration of complex applications and controls
Configuration data can be uploaded/downloaded via remote access
Extensions: Printer, key switches, LED indicators
Time and situation-dependent changeover of detector parameter sets
General features and functions
Fast Ethernet interface for a heterogeneous network
Process signals from Sinteso
Siemens danger management system can be connected
Slots for RS232 and RS485 serial interfaces
Floor repeater devices, alarm devices, and mimic displays on the FDnet detector line
All detector lines are monitored for ground faults.
Integrated degraded mode function
Freely configurable, time-dependent controls with optional weekly switching programs
Time and situation-dependent changeover of detector parameter sets
Controls for synchronous activation of sounders / sounder bases with signal sound,
flash, and voice output
The control panel and the fire detection system are custom-configured using the
‘SintesoWorks’ software
Firmware for all processor-controlled control panel components can be updated
Customer texts can be adapted directly on the operating unit of the control panel or with
the ‘SintesoWorks’ software
Up to 13000 events can be called up from the event memory and filtered based on
various criteria
Automatic summer/normal time changeover
Operating unit
The following elements are available on the operating unit:
CPU module and electronics
Ethernet connection
Slots for RS232 and RS485 modules and network modules (SAFEDLINK)
Space for ‘Kaba’ or ‘nordic’ key switch
Space for event printer (depending on version)
Peripheral data bus connection for optional LED modules
Periphery board
The following elements are available on the periphery board:
Connection terminals for:
FDnet lines
Remote transmission (alarm, fault)
Horn output
Configurable control inputs and outputs
Monitored alarm and fault output
Power supply and emergency supply
۲x slot for loop extension (FDnet)
Power supply unit 150 W, emergency power supply
The power supply feeds the hardware and charges the batteries.
In the event of a power cut, the batteries provide emergency current.
Housing
A pivoting mounting plate can be fitted for the following elements above the periphery board
on the rear housing panel:
۱x fire brigade periphery module (for Germany)
۲x sounder module (as an alternative to mounting on U-rail TS35)
Configuration
The following software allows the system to be customized:
SintesoWorks
نقد و بررسیها
هنوز بررسیای ثبت نشده است.